1034 GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEMS ARE STOCKED IN OUR WAREHOUSES BASED ON REGIONAL DEMAND. IF AN ITEM IS NOT IN STOCK AT A LOCAL WAREHOUSE, ADDITIONAL CHARGES MAY APPLY. PROPS Solid cast aluminum. Welds to lower unit. Easily cut to shape. REPLACEMENT SKEG Item# Application A B C D List 232-RS1DP Bombardier, Evinrude, Johnson, OMC, Yamaha V6 Outboards 51/ 2" 6" 101/ 4" 9" 104.69 EA 232-RS2DP Bombardier, Evinrude, Johnson, OMC, Yamaha V4 Outboards (85 to 140 HP) 41/ 2" 53/ 4" 91/ 2" 10" 104.89 EA 232-RS4DP Mercury V6 Outboards and Mercruiser Stern Drives (I/Os) 31/ 2" 61/ 2" 91/ 4" 101/ 2" 118.99 EA Packing Boxes, Shaft Seals and Accessories Item# Shaft Size List 369-RBGF1250B 11/ 4" 4-1/2” x 4-1/2” 1176.29 EA Cast red bronze machine finished to precise tolerances. Designed for internal mount, with long neck below the flange for application in all hulls. Furnished with brass studs for metal compatibility and strength. Complete with braided flax packing in place. A backing plate is available separately. BRONZE RUDDER BOX Item# Shaft Dia.: Stern-Tube List 369-SPNS100B16 1" 15/ 8" 234.69 EA 369-SPNS1125B175 11/ 8" 13/ 4" 189.09 EA 369-SPNS125B25 11/ 4" 21/ 2" 460.79 EA Cast red brass with precision-machined threads. Complete with packing nut, jam nut, and braided flax packing. Coolant fittings and electrical ground screw are available on a special order basis. BRONZE SHAFT STUFFING BOX, NUT STYLE Item# Shaft Dia.: Stern-Tube Length List 752-02034112 3/ 4" 11/ 2" - 15/ 8" 6.875" 699.39 EA 752-02078112 7/ 8" 11/ 2" - 15/ 8" 6.875" 699.39 EA 752-0225M112 25 mm 11/ 2" - 15/ 8" 6.875" 722.39 EA 752-02100112 1" 11/ 2" - 15/ 8" 6.875" 722.39 EA 752-02100200 1" 2" - 21/ 8" 6.875" 722.39 EA 752-02118112 11/ 8" 11/ 2" - 13/ 4" 6.875" 722.39 EA 752-02118200 11/ 8" 2" - 21/ 8" 6.875" 722.39 EA 752-02114134 11/ 4" 13/ 4" - 2" 7.5" 825.99 EA 752-02114214 11/ 4" 21/ 4" - 23/ 8" 7.5" 825.99 EA 752-02114234 11/ 4" 23/ 4" - 3" 8.875" 896.99 EA 752-02138214 13/ 8" 21/ 4" - 23/ 8" 7.5" 825.99 EA 752-02112214 11/ 2" 21/ 4" - 21/ 2" 9.155" 1092.69 EA 752-02112234 11/ 2" 23/ 4" - 3" 9.2175" 1092.69 EA 752-02134234 13/ 4" 23/ 4" - 3" 9.2175" 1194.39 EA 752-02134314 13/ 4" 31/ 4" - 31/ 2" 9.2175" 1194.39 EA 752-02200312US 2" (Over-Bore) 31/ 2" - 35/ 8" 9.03" 1276.09 EA 752-02200234 2" 23/ 4" - 3" 9.2175" 1405.09 EA 752-02200314 2" 31/ 4" - 31/ 2" 9.2175" 1276.29 EA 752-02212312 21/ 2" 31/ 2" - 35/ 8" 9.625" 1600.99 EA 752-02300414 3" 41/ 4" - 41/ 2" 10.3125" 2283.39 EA The P.S.S. (Packless Sealing System) shaft seal is a mechanical face seal that replaces the packing gland and is installed by builders and the USCG as standard equipment. The dripless operation of the P.S.S. eliminates needless bilge pumping, minimizes corrosion, and reduces maintenance by ending the need to adjust packing or replace shaft from damage due to the packing gland. Need to know both shaft and stern tube (shaft log) diameters to order. Over-Bore Versions: Used for boats that have misalignment issues with the shaft. The bigger bore gives more room for error. PSS SHAFT SEAL Item# Shaft Dia.: Stern-Tube List 752-07078112R 7/ 8" 1.5" - 1.75" 215.09 EA As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or chemical deterioration. The PSS bellow, O-rings & set screws should be replaced in six year intervals. Bellows may need to be more frequently inspected in an environment where non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate rubber deterioration, as will an ozonater. Includes (1) Bellow, (2) o-rings, (5) Set screws, (4) Hose clamps, (1) Tube of thread lock, (1) Allen key PSS MAINTENANCE KIT Item# Hose List 752-07KIT100 1" 110.49 EA 752-07KIT114 11/ 4" 122.59 EA T-Kits help facilitate the installation of the PSS Shaft Seal. These T-Kits enable the installer to tee into the raw water discharge hose and plumb water to the hose barb fitting of the PSS Shaft Seal. Some examples of water pick-up points are: A. Between the heat exchanger and riser. B. Between oil cooler and heat exchanger C. Between the water pump and oil cooler T-Kits to supply water from cooling system for speeds over 12 knots. Before ordering measure the inside diameter of the cooling hose which you intend to tee off from. ENGINE WATER FEED T-KIT
RkJQdWJsaXNoZXIy MTI2MTky