GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW D SEA VALUE Y OVERSIZED GCOURIER SURCHARGE SECTION 1067 ENGINE Item# Setback Application List 232-AHJM4DP 4" 115hp 2207.99 EA Opt. Accy. Description List 232-AHJMCMA Adapter for clamp-on motors 314.99 EA The smallest and lightest hydraulic jack on the market is ideal for shallow water skiffs and flats boats. It has a footprint of only 145/ 8" W x 111/ 2" H with a weight of only 23 lbs. The strong, self-contained actuator takes only 8 seconds to go from top to bottom and has 5" of travel. 3 mounting hole options on the transom side and 2 on the engine side. Optional adapter available to accommodate clamp-on outboard motors if needed. ATLAS MICRO JACKER™ JACK PLATE Item# Rating Setback Finish List Atlas™ Hydraulic Jack Plate 232-AHJC4VDP Up to 300hp/625 lbs. 4" Aluminum 2938.19 EA 232-AHJC6VDP Up to 300hp/625 lbs. 6" Aluminum 2655.69 EA 232-AHJ8VDP Up to 300hp/625 lbs. 8" Aluminum 3210.19 EA 232-AHJ10VDP Up to 300hp/625 lbs. 10" Aluminum 3189.99 EA 232-AHJ12VDP Up to 300hp/625 lbs. 12" Aluminum 3039.79 EA Atlas™ Hydraulic Jack Plate - Black 232-AHJ4VBDP Up to 300hp/625 lbs. 4" Black 2802.69 EA 232-AHJ6VBDP Up to 300hp/625 lbs. 6" Black 2841.59 EA 232-AHJ8VBDP Up to 300hp/625 lbs. 8" Black 3034.99 EA 232-AHJ10VBDP Up to 300hp/625 lbs. 10" Black 3254.29 EA 232-AHJ12VBDP Up to 300hp/625 lbs. 12" Black 3212.19 EA Heavy Duty Atlas™ Hydraulic Jack Plate 232-AHJ6VHDDP Up to 475hp 6" Aluminum 3013.89 EA Designed to meet the demands of today's high performance outboards. This one piece design featuring the innovative Rod and Slot lifting system will handle the stresses from the heaviest and most powerful outboards on the market today. All hydraulics are built into the jack, eliminating the installation of pumps and reservoirs inside the transom as well as hydraulic hoses running through the transom. The high-tech engineered polymer rods are 6 times more abrasion resistant than steel and are manufactured from self-lubricating material. Lifts from top to bottom in 8 seconds and installs in half the time of comparable jacks. ATLAS™ HYDRAULIC JACK PLATE Heavy Duty AHJ4VDP AHJ10VDP Item# Fits Color List 232-FAGK2SSDP 6", 10" and 12" Models Black w/SS Bezel 850.19 EA Digital LED position gauges fit Atlas hydraulic jack plates. Numbers range from 0-20 and each number indicates a 1/ 4" rise. Atlas jack plates are predrilled to accept sensors. ATLAS GAUGE KIT Bolt kit for mounting outboard engine to jack plates. Kit contains: • 4 each 1/ 2"-13 x 3" long bolts - stainless steel • 4 each 1/ 2"-13 lock nuts - brass with nylon insert • 8 each 1/ 2"-flat washers - stainless steel BOLT KIT FOR JACK PLATES Item# List 232-BK1DP 83.39 EA Outboard Motor Brackets Cast aluminum spacer provides 2" of setback for bolt-on motors. Made of 713 cast aluminum, dipped in a zinc rich primer then powder coated. This solid spacer installs directly on the transom or adds additional setback to an existing jack plate. Has a standard BIA bolt pattern, but is drillable for non-standard patterns. Overall size: 16"W x 13.25H x 2"D. Support weight is 300HP and 635 lbs. By MarineTech TM FIXED SETBACK PLATE Item# Setback List 781-550220 2" 623.39 EA Item# HP Max Load List 781-550024 12 85 lbs. 231.59 EA 781-550028 35 263 lbs. 310.39 EA Vertical transom mount bracket. Each stainless steel bracket measures 81/ 2" long by 61/ 8" wide. 101/ 8" setback. Holes in poly board are pre-drilled for quick assembly of bracket. Holes in poly board are predrilled for quick assembly. 550024 - Safety Cable not included 550028 - Safety Cable included Use of a safety cable is recommended. By MarineTech TM FIXED OUTBOARD MOTOR BRACKET Heavy duty aluminum bracket. Black anodized finish. Designed to hold 2 and 4 stroke motors weighing up to 150 lbs. 5" high adjustment to accommodate short shaft motors. By MarineTech TM FIXED OUTBOARD MOTOR BRACKET Item# Description Setback List 781-550027 81/ 2" setback 81/ 2" 693.60 EA Item# Rating List 781-550030 15 HP 694.74 EA Adjustable outboard motor bracket designed to mount on most swim platforms. Rated for 2- and 4-stroke. Constructed of hard-coat anodized aluminum and can be adjusted to fit most platform heights and motor shaft lengths for optimal prop depth and performance. Constructed of anodized aluminum. Comes complete with transom support bar for weight support torque resistance. Stainless Steel mounting hardware included. (Do not use without the included Panther 550415 safety cable.) By MarineTech TM ADJUSTABLE OUTBOARD MOTOR BRACKET-SWIM PLATFORM MOUNT Item# HP Max Load Vertical Travel List 781-550012 Up to 12 82 lbs. 14" with 5 stops 423.09 EA 781-550021 Up to 20 115 lbs. 11" with 5 stops 477.29 EA Heavy-duty, light weight aluminum, adjustable motor brackets are designed for fresh water use on both power and sail boats. Manual operation. Unit is spring loaded to make lifting easier. Motor pad is 8.5 x 10.5 x 1.75. Do not use with 4 stroke engines. By MarineTech TM ALUMINUM 2-STROKE OUTBOARD MOTOR BRACKET 550012 550021
RkJQdWJsaXNoZXIy MTI2MTky