GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEMS ARE STOCKED IN OUR WAREHOUSES BASED ON REGIONAL DEMAND. IF AN ITEM IS NOT IN STOCK AT A LOCAL WAREHOUSE, ADDITIONAL CHARGES MAY APPLY. 404 SECTION TRAILERING ACTUATOR LOCKOUT KIT Item# For List 445-K7176900 A-60, A-75, A-84, AC-84, XR-84 35.99 EA Item# Description For List 445-K7177000 Breakaway Lever Kit A-160, A-200 134.39 EA ACTUATOR EMERGENCY CABLE REPLACEMENT KIT Item# For List 445-K7177100 A-160, A-200 343.79 EA Includes 2 shock absorbers & 1 front shock pin. ACTUATOR SHOCK ABSORBER REPLACEMENT KIT Hubs Item# Number of Lugs Description Capacity Case List 50-53021 4 Galvanized 1,250 lbs. 4 142.89 EA 50-53041 5 UHI Galvanized 1,250 lbs. 4 146.69 EA 50-53121 4 Painted 1,250 lbs. 4 128.49 EA 50-53141 5 UHI Painted 1,250 lbs. 4 129.99 EA One piece cast hubs complete with pregreased bearings, seals, dust caps, cotter pin and lug nuts. 1/ 2"-20 Studs. Greased with Red "N" Tacky. Inner Bearing Code: L44643, Outer Bearing Code: L44643, Inner Race Code: L44610, Outer Race Code: L44610, Seal Code: 125255UC 4 Lug: Lug nuts on a 4" bolt pattern. 5 Lug: Lug nuts on a 4.5" bolt pattern. Note: The UHI hub uses tapered roller bearing cones and cups. This configuration requires a minimal amount of end play that is provided at the time of assembly. 1" TRAILER WHEEL HUB 4 Lug (Galv.) 4 Lug (Painted) 5 Lug (Painted) Item# Number of Lugs Description Capacity Case List 50-53061 5 UHI Galvanized 1,350 lbs. 4 148.29 EA 50-53161 5 UHI Painted 1,350 lbs. 4 128.49 EA One piece cast hubs complete with pregreased bearings, seals, dust caps, cotter pin and lug nuts. 1/ 2"-20 Studs. Inner Bearing Code: L44649, Outer Bearing Code: L44649, Inner Race Code: L44610, Outer Race Code: L44610, Seal Code: 125255UC Lug nuts on a 4.5" bolt pattern. Note: The UHI hub uses tapered roller bearing cones and cups. This configuration requires a minimal amount of end play that is provided at the time of assembly. 1-1/16" TRAILER WHEEL HUB 5 Lug (Painted) Item# Number of Lugs Description Capacity Case List 50-53101 5 UHI Galvanized 1,750 lbs. 4 161.89 EA One piece cast hubs complete with pregreased bearings, seals, dust caps, cotter pin and lug nuts. 1/ 2"-20 Studs. Inner Bearing Code: L68149, Outer Bearing Code: L44649, Inner Race Code: L68111, Outer Race Code: L44610, Seal Code: 171255UCC Lug nuts on a 4.5" bolt pattern. Note: The UHI hub uses tapered roller bearing cones and cups. This configuration requires a minimal amount of end play that is provided at the time of assembly. 1-3/8" x 1-1/16 TAPERED TRAILER WHEEL HUB
RkJQdWJsaXNoZXIy MTI2MTky