GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW D SEA VALUE Y OVERSIZED GCOURIER SURCHARGE SECTION 451 TRAILERING • Meets the requirements of SAE/DOT/ FMVSS/CMVSS standards when properly installed • For Over 80" applications • Sonically sealed • Only 5/8” thick • 3 Diodes • Polycarbonate lens and housing LED ULTRATHIN WATERPROOF IDENTIFICATION LIGHT BAR Item# Size Volts Amps Bulb Case List 50-51581 15" W x 1.375" H x 0.625" D 12.8V .02A LED 6 36.09 EA • Meets the requirements of SAE/DOT/ FMVSS/CMVSS standards when properly installed • Sonically sealed • Low-profile design; only 5/8” thick • 11 Diodes • Surface mount on 14-1/8” centers • Polycarbonate lens and housing • Meets SAE S2T2I6 for over 80" wide vehicles w/ built-in reflex meeting SAE A • Hard wired with separate ground wire LED THINLINE SEALED STOP/TURN/TAIL LIGHT Item# Size Volts Amps Bulb Case List 50-51571 15" W x 1.375" H x 0.625" D 12.8V .35A LED 6 61.39 EA Item# Size Case List 50-52501 14" L x 1" W x 1/ 2" D 10 35.36 EA • 6 LEDs • Waterproof • "V" Shaped bend to fit contour of trailer • 58" wire leads are copper braided and tinned for corrosion resistance • Mounting holes are 81/ 2" on center • Use #8 pan head or #8 self-drilling fasteners LED 7° BEND LIGHT BAR Item# Size Volts Amps Bulb Case List 50-52901 14.25" W x 1.2" H x 1.3" D 12.8V .153A LED 6 50.19 EA • Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed • Designed for Over 80" Wide Trucks/Trailers • Waterproof • 9 LED lights • Single wire • Grounds through mounting hardware • Stainless steel base LED SEALED 3-PIECE IDENTIFICATION LIGHT BAR Clearance and Marker Lights - Incandescent Item# Description Volts Amps Bulb Case List 50-52591 Amber module only 12.8V .2A Incandescent 12 8.19 EA 50-52601 Red module only 12.8V .2A Incandescent 12 10.69 EA • Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed • Sonically sealed • Waterproof • PC-rated design • Designed for 12V systems • Available in amber or red Sonically sealed, waterproof marker/clearance replacement light. SEALED MARKER/CLEARANCE REPLACEMENT LIGHTS 52591 52601 Item# Lens Volts Amps Bulb Case List 50-52521 Amber 12.8V .2A Incandescent 12 9.49 EA 50-52531 Red 12.8V .2A Incandescent 12 9.39 EA • Meets the requirements of SAE/DOT/ FMVSS/CMVSS standards when properly installed • Sonically sealed, waterproof • Stud-Mount • Polycarbonate lens and housing, stainless steel base • Single wire design grounds through mounting hardware • Size: 2.063" x .688" x 1" SEALED MARKER/CLEARANCE LIGHT 52521 52531 Item# Mount Color Volts Amps Bulb Case List 50-52611 Stud Amber 12.8V .2A Incandescent 12 6.69 EA • Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed • Lens with reflex eliminates need for separate reflector • Single wire design grounds through mounting hardware • Screw-on lens, replaceable bulb, black plastic base • Size: 3.875" x 2.375" x 1.094" SURFACE MOUNT MARKER/CLEARANCE LIGHT WITH REFLEX Item# Lens Size Pkg. List 177-142A Amber 21/ 2" Bulk 7.49 EA 177-142R Red 21/ 2" Bulk 7.49 EA 177-V142R Red 21/ 2" Viz-Pack 8.49 EA 142A 142R Lexan lens and housing sonic welded into a sealed unit for maximum service and protection. Requires a mounting grommet (#14218) and plug (#14249) to complete installation. SEALED CLEARANCE AND SIDE MARKER LIGHT Item# Size Color Pkg. List 177-146A 2" Amber Bulk 6.39 EA 177-146R 2" Red Bulk 6.39 EA Amber Red May be used as combination side marker and clearance light for over-80" application when properly mounted. Lens is sonic welded to housing to form single unit. Requires mounting grommet and 2-wire plug to complete installation. Features a 15,000-hour long-life bulb. SEALED 2" CLEARANCE/SIDE MARKER LIGHT Item# Color List 177-M108WA Amber 6.79 EA 177-M108WR Red 6.79 EA Repl. Parts Description Color List 177-10815A Replacement lens Amber 4.39 EA 177-10815R Replacement lens Red 4.39 EA Acrylic lens features built-in reflector which eliminates the need for a separate reflector. Mounts on 3" centers with a single lead wire and grounds through the mounting hardware. OVAL COMBINATION CLEARANCE/SIDE MARKER LIGHT Amber Red Identification Light Bars - LED
RkJQdWJsaXNoZXIy MTI2MTky