GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW D SEA VALUE Y OVERSIZED GCOURIER SURCHARGE SECTION 649 ELECTRICAL Item# List 11-BS11040 126.39 EA • Automatically combines two batteries when charging and isolates the two batteries when not charging • Nominal Voltage: 12VDC • 125A Continuous • 140A Intermittent • No voltage drops like battery isolators (0.6V) • Robust Glass Fiber nylon enclosure • LED indication when VSR is engaged • Port for remote status LED • Surface or panel mount options • Power Consumption: 10mA (Standby)/ 330mA (Engage), 0mA (Storage Mode) • Zero power consumption when the engine is off • CE and IP67 Certifications VOLTAGE SENSITIVE RELAY Item# Size List 262-82012301 11/ 4" D x 41/ 2" W x 51/ 2" H 361.99 EA Charges auxiliary or starting batteries from your inverter/charger with limited voltage drop • 15 A maximum charge current, automatically adjusts for 12 or 24 volt battery banks, automatically switches on/off without affecting the battery bank or overcharging • Other features include built-in thermal and over-current protection, reverse polarity protection and easy three wire installation ECHO-CHARGE AUXILIARY BATTERY CHARGER • Twin or Triple engine configurations • Remotely operated switches via analog inputs or CZone® • Configurable dual direction voltage sensitive switches • Monitors and transmits all battery voltages, including house bank state of charge over NMEA2000 for integration with multi-function displays • 2 x additional sensor inputs • Full mechanical override of all switches for safety and servicing • Parallel two units together for 4, 5 or 6 engine installations A complete battery management system for 2 - 6 outboards. Simplifies battery management with remotely activated switches, automatic Voltage Sensitive Switching (VSS) and emergency parallel functionality in a robust, easy-to-install, ignition-protected IPX7 enclosure. SMART BATTERY HUB Item# Description List 969-80716003000 Twin Engine 3084.49 EA 969-80716003100 Triple Engine 3701.19 EA Battery Disconnect Switches • Poly housing is rust and corrosion proof • Key and cover prevent corrosion BATTERY DISCONNECT SWITCH 2 Hole 4 Hole Item# Amps Mount Volts Case List 50-11571 200 Continuous 1,000 Inter. 2 Holes 12V 12 54.29 EA 50-11581 200 Continuous 1,000 Inter. 4 Holes 12V 12 53.29 EA Item# Volts Amps Replaces List 969-1001002 6-36 Rated for 125A @ 12VDC CH M-284 104.69 EA 969-1001001 6-36 Rated for 175A @ 12VDC CH M-284-09-BP 150.89 EA Compact lever-operated battery disconnect switch. Suitable for 6-36V DC system configurations. 3/ 8" Brass terminal studs. 3/ 4" Mounting hole, up to 5/ 16" panel thickness. MASTER DISCONNECT SWITCH 1001002 1001001 Item# Size Amps List 661-7615 3.89"W x 3.5"H 210A (Int.), 120A (Cont.) 242.73 EA Can be configured to be used as one of the following battery saving products: • Timer Disconnect 12V signal triggers relay to connect battery power to devices • When signal is removed the timer is activated and will disconnect devices after a preset time • Timer ranges from 15 minutes to 4 hours • Low Voltage Disconnect Senses low battery voltage and automatically disconnects devices • Low voltage setting can be used in conjunction with Timer Disconnect. Low voltage will disconnect devices prior to preset time to preserve battery power • Automatic Charging Relay Automatically combines 2 batteries for charging, isolates them when discharging • Single side sensing design only monitors the voltage of the start battery • Ideal for AGM auxiliary batteries or batteries larger than the start battery • Solenoid 12V signal will connect or disconnect relay without any time delay • Ideal for AGM auxiliary batteries or batteries larger than the start battery Solenoid • 12V signal will connect or disconnect relay without any time delay ATD AUTOMATIC TIMER BATTERY DISCONNECT Single Pole. Two positions: Off-On. Rating: 6-36V DC; 175A continuous, 1000A intermittent /175A continuous. Die cast lever. Brass case. Long stem: 3/ 4'' -16 thread. Dia. x 113/ 32 Long. Terminals: two 3/ 8" dia. studs. Fits panels up to 15/ 16" thick. Item# Connector List 12-M284BP Copper 132.05 EA M284 MASTER DISCONNECT SWITCHES - SINGLE POLE Item# Volts Amps Mount List 12-880062BP 32 300A Continuous Panel Mount 82.59 EA Isolates the batteries and eliminates battery drain when vehicle or vessel is stored overnight or longer periods. • Black plastic construction will not corrode, stands up to salt spray • Ingress protected to IP67/ IP69K • Depth of only 3" (knob front to end of studs), for limited space behind panel • Ignition protected for installation in a battery box • Stainless steel hardware and tin-plated copper contact SR SERIES MASTER DISCONNECT SWITCH Item# Amps Volts Size List 354-4227901 140 12 25/ 8" x 25/ 8" x 2" 109.23 EA Allows two batteries to automatically charge at the same time and then isolates the batteries, ensuring the starting battery is always charged. Automatically engages or disengages the circuit at pre-set voltages, eliminating the possibility of discharging the primary starting battery. Cut-in voltage: 13.3V. Cut-out voltage: 12.8V. Surge protected. An LED indicator alerts the user when the unit is engaged. Constructed of machined brass with a weatherproof injection molded nylon housing and silver tipped contacts. Includes two #8 RH fasteners. IP65 rating. SMART DUAL BATTERY ISOLATOR
RkJQdWJsaXNoZXIy MTI2MTky