GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW D SEA VALUE Y OVERSIZED GCOURIER SURCHARGE SECTION 701 ELECTRICAL This Buss Bar Screw-Terminal Block is equipped with two each #10-24 studs for main wire connection. Constructed of tin plated brass and ABS. Designed for use with tinned copper marine wire which shares the same expansion rate to prevent loosening wires and reducing electrolytic corrosion caused by pairing two disparate metals. Maximum: 48VDC, 100 amps. Installs with two #10 RH fasteners (not included). BUSS BAR SCREW-TERMINAL Item# Terminals A B C D Amps List 354-4267101 5 x #8-32 43/ 16" 7/ 8" 15/ 16" 37/ 16" 100 30.49 EA 354-4267111 10 x #8-32 61/ 4" 7/ 8" 15/ 16" 51/ 2" 100 27.35 EA Equipped with a two studs for main wire connection. Maximum: 48VDC. Installs with two #10 RH fasteners (not included). 426722 has certification by ISO, ABYC, SAE, USCG, and CE low voltage directive standards. BUSS BAR SCREW-TERMINAL BLOCK Item# Stud Terminals A B C D Amps List 354-4267221 1/ 4" 10 x #8-32 6" 11/ 4" 13/ 8" 53/ 16" 150 34.97 EA 354-4267241 1/ 4" 20 x #8-32 91/ 8" 11/ 4" 13/ 8" 87/ 16" 150 46.94 EA 354-4267331 5/ 16" 12 x #10 715/ 16" 11/ 2" 15/ 8" 71/ 8" 250 49.91 EA These Buss Bar Stud Terminal Blocks are primarily used to route and connect power or ground circuits. The raised bus provides easy access on a single stud, making it useful for consolidating multiple wires or feeding multiple circuits. Constructed of tin plated brass and ABS. Maximum: 48VDC. Installs with #10 RH fasteners (not included). Item# Terminals A B C D E Amps List 354-4267181 4 x #10-24 43/ 16" 7/ 8" 7/ 8" 37/ 16" - 100 A 20.47 EA 354-4267281 4 x 1/ 4"-20 6" 11/ 4" 13/ 8" 53/ 16" - 150 A 40.61 EA 354-4267381 4 x 5/ 16"-18 8" 11/ 2" 15/ 8" 71/ 8" - 250 A 63.24 EA BUSS BAR STUD TERMINAL 4267181 Item# Terminals List 11-FS40810 12 25.79 EA • Overall size: 3 3/ 8"W x 2 1/ 4"L x 1 5/ 8"H • Screw size: M4, Stud size: M5 • ABYC/USCG compliant Transparent cover with recessed area for labels (60pc. decal set included) 408 SERIES GROUND BUS BAR W/COVER • Insulated stud post is designed to terminate 1 or more heavy-duty cables • Insulated base • Securely connects high amperage cables • Glass Fiber reinforced nylon base Item# Stud Volts List 11-FS46570 Single M8 (5/16") Up To 48VDC 22.79 EA 11-FS46540 Single M10 (3/8") Up To 48VDC 22.79 EA 11-FS46580 Dual M10 (3/8") Up To 48VDC 37.19 EA 11-FS46590 Dual M8/M10 (3/8" & 5/ 16") Up To 48VDC 37.19 EA TERMINAL STUD Singe Dual • Max Voltage: 48VDC • Max Continuous Amp: 100A • SAE threaded, stainless steel screws and studs • Tin-plated copper bus • Flame Retardant ABS Base • 4.2" x 0.88" x 1.37" MINI BUS BAR W/COVER Item# Stud Type Rating List 11-FS46690 3/ 16" 4-Stud 100A 46.29 EA • Max Volts: 300VAC/ 48VDC • Max Continuous Amp: 250A DC/ 130A AC • For positive distribution or collection of AC/DC grounds • Stainless steel studs and screws • Tin-plated copper bus rated to 250A • Flame retardant ABS base • SAE threaded studs • 6" x 1.25" x 1.37" Item# Stud Terminals Type Rating List 11-FS46700 1/ 4" 6-Stud 250A 74.99 EA 11-FS46710 1/ 4" #8-32 12-Gang 250A 134.39 EA BUS BAR W/COVER FS46700 FS46710 Item# Size Terminals Amps List 354-4266933 51/ 2"W x 23/ 4"H x 111/ 16"D 12 150 64.79 EA Positive or negative DC distribution on one block or AC neutral and safety ground collection on one block. Corrosion resistant tin-plated copper and ABS with a polycarbonate cover. Includes two 1/ 4"-20 stainless stud terminals and six #8-32 stainless screw terminals per buss. Requires four #8 FH fasteners (included). Maximum: 48VDC, 150A per buss; 300VAC, 150A per buss. CE, RoHS compliant. DUAL BUSS BAR WITH COVER
RkJQdWJsaXNoZXIy MTI2MTky