GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEMS ARE STOCKED IN OUR WAREHOUSES BASED ON REGIONAL DEMAND. IF AN ITEM IS NOT IN STOCK AT A LOCAL WAREHOUSE, ADDITIONAL CHARGES MAY APPLY. 790 SECTION HARDWARE Constructed of corrosion resistant stamped 304 stainless steel to withstand the harsh marine environment. Installs with six #8 FH fasteners (not included). DOOR HINGES Item# A B C D E Qty List 354-2010301 23/ 4" 13/ 8" 13/ 8" 11/ 2" 1.5 mm 2 27.39 PK Item# A B C D E Fastener List 354-2030801 2" 1" 1" 3" 1/ 16" # 8 FH 41.49 PK 354-2030811 3" 11/ 2" 11/ 2" 3" 1/ 16" # 8 FH 48.49 PK Consist of two rectangular leaves with a Teflon coated pin that produces a very precise, low friction movement for a very high end feel with anti-rattle properties. Designed to attach to abutting surfaces of a door and door jamb or to be mortised for a flush installation. Constructed of corrosion resistant stamped 304 stainless steel. Installs with six #8 FH fasteners (not included). DAMPENING BUTT HINGE DAMPENING BUTT HINGE Item# A B C D E Fastener List 354-2030701 11/ 4" 5/ 8" 5/ 8" 11/ 2" 1/ 16" # 8 FH 26.89 PK 354-2030711 11/ 2" 3/ 4" 3/ 4" 2" 1/ 16" # 8 FH 31.89 PK 354-2030721 2" 1" 1" 2" 1/ 16" # 8 FH 34.49 PK Consist of two rectangular leaves with a Teflon coated pin that produces a very precise, low friction movement for a very high end feel with anti-rattle properties. Designed to attach to abutting surfaces of a door and door jamb or to be mortised for a flush installation. Constructed of corrosion resistant stamped 304 stainless steel. Installs with four #8 FH fasteners (not included). DAMPENING OFFSET BUTT HINGE Item# A B C D E F Fastener List 354-2035901 11/ 2" 3/ 4" 3/ 4" 11/ 2" 1/ 16" 3/ 8" #8 FH 32.69 PK Consist of two leaves with a Teflon coated pin that produces a very precise, low friction movement for a very high end feel with anti-rattle properties, designed to be mounted on the front surface of a raised door with a 3/ 8" offset on one side. Constructed of corrosion resistant stamped 304 stainless steel. Installs with four #8 FH fasteners (not included). Door and Utility Hinges 34141: Fiberglass filled black nylon with stainless steel pin. Very sturdy and extremely lightweight. 34151: Polished 304 stamped stainless steel. Black nylon base plate Note: Can be used without base. 34241: Chrome plated zinc. 120° opening. Item# Size Fastener Qty Case List 50-34141 3" x 13/ 8" #8 2 12 9.56 PK 50-34151 27/ 8" x 11/ 2" #8 2 12 16.51 PK 50-34241 3" x 11/ 2" #8 2 12 25.07 PK 34241 34141 34151 UTILITY HINGE Item# Size Fastener Qty Case List 50-34101 11/ 2" x 3" #8 2 12 42.76 EA 50-34111 11/ 2" x 4" #8 2 12 59.15 PK 316 Stainless steel. Drilled and counter sunk. DOOR HINGE Item# Size Fastener Qty Case List Center-Barrel 50-34811 11/ 2" x 19/ 16" M4 or #8 2 10 65.24 PK Barrrel-Up 50-34821 11/ 2" x 11/ 2" M4 or #8 2 10 65.24 PK 50-34831 11/ 2" x 21/ 4" M4 or #8 2 10 62.34 PK 50-34841 19/ 16" x 3" M4 or #8 2 10 65.24 PK • 316 Stainless steel • Ideal for light-weight doors, such as overhead door, baitwell lid, glove box, interior door, anchor locker, electronic panel, etc. • Provides constant torque throughout the entire range of motion • Holds door open without any torque adjustment • Passed 500-hour salt-spray test • Requires M4 or #8 fasteners (not included) FRICTION HINGE - STAINLESS STEEL 34811 34821 34831 34841 Item# Color A B C D E Qty Pkg. List 354-2025301 Black 3" 11/ 2" 11/ 2" 13/ 8" 3/ 16" 2 Card 10.39 PK 354-2025311 White 3" 11/ 2" 11/ 2" 13/ 8" 3/ 16" 2 Card 10.69 PK Constructed of UV resistant, injection molded fiberglass nylon with a corrosion resistant stainless steel pin. Installs with six #8 FH fasteners (not included). DOOR HINGES Black White
RkJQdWJsaXNoZXIy MTI2MTky