GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEMS ARE STOCKED IN OUR WAREHOUSES BASED ON REGIONAL DEMAND. IF AN ITEM IS NOT IN STOCK AT A LOCAL WAREHOUSE, ADDITIONAL CHARGES MAY APPLY. 806 SECTION HARDWARE Features integral 5/ 16"-18 threaded studs and installs with two 5/ 16"-18 nuts (not included). Formed of 7/ 8" 304 stainless steel, they feature flanged ends to provide a larger mounting surface for greater durability. Functional and attractive with no mounting hardware visible. STUD MOUNT FLANGED GRAB RAIL Item# Tube A B C List 354-2542091 7/ 8" 10" 83/ 4" 21/ 4" 63.49 EA 354-2542121 7/ 8" 131/ 2" 12" 21/ 4" 67.99 EA 354-2542181 7/ 8" 193/ 8" 18" 21/ 4" 81.59 EA Designed to provide a sleek, smooth handrail transition to the mounting surface of your boat. Functional and attractive, with no visible mounting hardware. Constructed of corrosion resistant formed 304 stainless steel also available in black matte finish. Installs with two 5/16”-18 nuts (included). STUD MOUNT HANDRAIL Item# Tube A B C D Fastener Finish List 354-2546111 3/ 4" 83/ 4" 71/ 2" 13/ 4" 11/ 4" 5/ 16"-18 Nut Black Matte 53.58 EA 354-2546131 3/ 4" 12" 103/ 4" 2" 11/ 4" 5/ 16"-18 Nut Black Matte 66.63 EA 354-2546171 3/ 4" 181/ 2" 163/ 4" 2" 11/ 4" 5/ 16"-18 Nut Black Matte 84.03 EA 354-2546191 3/ 4" 24" 221/ 2" 2" 11/ 4" 5/ 16"-18 Nut Black Matte 97.08 EA 354-2546011 3/ 4" 83/ 4" 71/ 2" 13/ 4" 11/ 4" 5/ 16"-18 Nut Stainless 46.33 EA 354-2546031 3/ 4" 12" 103/ 4" 2" 11/ 4" 5/ 16"-18 Nut Stainless 57.93 EA 354-2546071 3/ 4" 181/ 2" 163/ 4" 2" 11/ 4" 5/ 16"-18 Nut Stainless 72.43 EA 354-2546091 3/ 4" 24" 221/ 2" 2" 11/ 4" 5/ 16"-18 Nut Stainless 84.03 EA Provides a larger mounting surface for greater stability. Functional and attractive, with no visible mounting hardware. Constructed of corrosion resistant formed 304 stainless steel also available in black matte finish. Installs with two 5/16”-18 nuts (included). STUD MOUNT FLANGED HANDRAIL Item# Tube A B C D Finish Fastener List 354-2546301 7/ 8" 10" 83/ 4" 21/ 4" 11/ 2" Black Matte 5/ 16"-18 Nut 62.28 EA 354-2546321 7/ 8" 131/ 2" 12" 21/ 4" 11/ 2" Black Matte 5/ 16"-18 Nut 78.23 EA 354-2546361 7/ 8" 193/ 8" 18" 21/ 4" 11/ 2" Black Matte 5/ 16"-18 Nut 102.88 EA 354-2546381 7/ 8" 251/ 4" 241/ 4" 21/ 4" 11/ 2" Black Matte 5/ 16"-18 Nut 120.28 EA 354-2546201 7/ 8" 10" 83/ 4" 21/ 4" 11/ 2" Stainless 5/ 16"-18 Nut 53.58 EA 354-2546221 7/ 8" 131/ 2" 12" 21/ 4" 11/ 2 Stainless 5/ 16"-18 Nut 68.08 EA 354-2546261 7/ 8" 193/ 8" 18" 21/ 4" 11/ 2" Stainless 5/ 16"-18 Nut 89.83 EA 354-2546281 7/ 8" 251/ 4" 241/ 4" 21/ 4" 11/ 2" Stainless 5/ 16"-18 Nut 104.33 EA 1-Loop handle Center to center is 105/ 16" all others are 101/ 16". TEAK HANDRAIL Item# Type Size List 299-60101 1-Loop 13"L x 23/ 8"H x 1"D 26.69 EA 299-60102 2-Loop 23"L x 23/ 8"H x 1"D 41.49 EA 299-60104 3-Loop 33"L x 23/ 8"H x 1"D 63.69 EA 299-60106 4-Loop 43"L x 23/ 8"H x 1"D 80.19 EA 299-60108 5-Loop 53"L x 23/ 8"H x 1"D 138.89 EA Tubular stainless steel, buffed to prevent corrosion. Easy to mount anywhere there is access to a thru-bolt. Made with 2" x 5/ 16" studs and mounts flush with included hardware. Lifetime guarantee. Made in the USA. STAINLESS STEEL HAND RAILS Item# Size List 332-H001A 12" 108.27 EA 332-H002A 18" 128.72 EA 332-H003A 24" 153.02 EA Hand Rail Fittings and Stanchions • Made of cast 316 polished stainless steel • Corrosion resistant • Ideal for cabin top, dash, side or stern handrails • Pre-drilled for two #10 screws • Height: 11/ 2" Item# Type Angle Tube Case List 50-38231 Forward 60° 7/ 8" OD 12 18.99 EA 50-38251 Center 60° 7/ 8" OD 12 17.39 EA 50-38291 Aft 60° 7/ 8" OD 12 20.57 EA 38291 38231 38251 HAND RAIL FITTINGS - STAINLESS STEEL Constructed of chrome plated die cast zinc. Recommended for freshwater use. Installs to deck with #10 FH fasteners (not included). Fittings can be attached to railing with set screws or can be pop riveted using stainless or aluminum rivets. For use with 7/ 8" OD stainless tubing with a wall thickness of 0.049". Item# Type Tube Height: Rail Fastener List 354-2865661 Right Hand 7/ 8" OD 21/ 8" #10 FH 17.39 EA 354-2865651 Left Hand 7/ 8" OD 21/ 8" #10 FH 17.39 EA 354-2865601 Center 7/ 8" OD 21/ 8" #10 FH 17.39 EA 60° ZAMAK STANCHIONS 2865601 2865661 2865651
RkJQdWJsaXNoZXIy MTI2MTky