GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEMS ARE STOCKED IN OUR WAREHOUSES BASED ON REGIONAL DEMAND. IF AN ITEM IS NOT IN STOCK AT A LOCAL WAREHOUSE, ADDITIONAL CHARGES MAY APPLY. 826 SECTION HARDWARE This ladder is manufactured with 1" heavy wall aluminum tubing. All assembly hardware is stainless steel and assembly is quick and easy. Quick release kit included. Simply tilt the ladder up and slide it out for storage and cleaning, or mount the ladder permanently with its pre-drilled holes. • Rail height :24 1/ 2'' above the dock • Distance to first step from dock surface :12'' • Distance between steps: 10 1/ 2'' • Steps are 15'' W x 4 3/ 4'' D QUICK RELEASE ALUMINUM LADDER Item# Steps Capacity List 686-DE2003F 3 450 lbs. 406.69 EA 686-DE2004F 4 450 lbs. 467.69 EA 686-DE2005F 5 450 lbs. 548.99 EA Designed to make a minimum carbon footprint, these ladders are manufactured with no welding processes involved to reduce material waste and save energy. Easy to assemble & includes stainless steel hardware. Ribbed anti-slip steps for a sure footing. • Rail Height: 181/ 2" (47,0cm) • Tread Depth: 21/ 2" (6,4cm) • Tread Width: 14" (35,6cm) • Distance to first step: 11" (27,9cm) • Distance between treads: 11" (27,9cm) ECO FLIP UP ALUMINUM LADDER Flipped Up Item# Steps Capacity List 686-DE2173F 3,4 500 lbs. 264.69 EA 686-DE2174F 4 500 lbs. 339.99 EA 686-DE2175F 5 500 lbs. 397.49 EA Tough and durable, this rotomolded polyethylene ladder swings up and out of the way, locking in place when not in use. Will not corrode with exposure and will not fade or crack. • Molded-in U.V. inhibitors and fungicides • Stainless Steel assembly hardware • Rail Height: 201/ 2" • Tread: 4" D x 14" W ROTOMOLDED FLIP-UP DOCK LADDER Item# Steps Capacity Color List 686-DE2064F 4 500 lbs. Grey 421.69 EA Rub Strakes Item# A B C D E Fastener List 354-0554081 8" 5" N/A 1/ 4" 3/ 4" #8 FH 15.99 EA 354-0554121 12" 41/ 2" 41/ 2" 1/ 4" 3/ 4" #8 FH 20.59 EA 354-0554181 18" 71/ 2" 71/ 2" 1/ 4" 3/ 4" #8 FH 29.59 EA 354-0554241 24" 71/ 16" 71/ 16" 1/ 4" 3/ 4" #8 FH 35.59 EA Durable and corrosion resistant 304 stainless steel rub strakes are designed to protect your boat's dock, fender, & anchor lines by preventing chafing from cap rails, gunwales, etc. Requires #8 FH fasteners (not included). RUB STRAKE Rub Rails and Inserts Item# Size Gauge Fastener Case List 50-29401 3/ 4" W x 12' L 0.062 #8 12 217.49 EA 50-29403 1" W x 12' L 0.077 #10 12 211.69 EA 50-29404 11/ 4" W x 12' L 0.077 #10 12 276.99 EA • 316 Stainless steel offers excellent corrosion resistance • Polished finish • Drilled and countersunk on 6" centers STAINLESS STEEL HOLLOW BACK RUB RAIL Item# Finish Size Length List 236-A110152TAL12DA Polished Clear 1" H x 7/ 16" W 12' 335.79 EA Designed for use without an insert. Easy tight radius bending as well as providing strength and protection. Polished, clear anodized finish to protect against the harsh marine environment. Models with a'' D'' suffix drilled and countersunk. ALUMINUM RUB RAIL
RkJQdWJsaXNoZXIy MTI2MTky