2024 Marine Catalogue - Canada

GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW ] SEA VALUE v OVERSIZED dCOURIER SURCHARGE ELECTRONICS 101 Cable Covers, Outlets and Thru-Deck Fittings Item# Hole Size Qty Case List 50-16251 Up to 11/ 4" 2 12 8.60 PK Gives boat that finished look. Covers unsightly wire passthru holes. Made of durable black plastic that will not corrode. Covers holes up to 11/ 4" in diameter. PLASTIC WIRE COVER Item# Description Color Hole Size Case List 50-17901] 1/ 4" Slot, 11/ 4" Flange Black 3/ 4" 12 16.94 EA 50-17971 9/ 32" Slot, 11/ 2" Flange Black 1" 12 24.03 EA 50-17921] 1/ 4" Slot, 11/ 4" Flange White 3/ 4" 12 16.94 EA 50-17991 9/ 32" Slot, 11/ 2" Flange White 1" 12 24.03 EA Watertight thru hull fitting. Self attaching. No additional hardware required. Accepts single or double cable. 2" maximum hull. CABLE THRU HULL FITTING 17901 17921 UV and weather resistant and great for routing cables, wire, etc. MOLDED PLASTIC CLAM SHELL 16161 16181 Item# Size Color Qty Case List 50-16161 17/ 16" x 111/ 16" White 2 12 13.89 PK 50-16171 2" x 23/ 8" White 2 12 14.72 PK 50-16181 17/ 16" x 111/ 16" Black 2 12 13.89 PK 50-16191 2" x 23/ 8" Black 2 12 14.72 PK Item# Size Screw Size Case List Polished Stainless Steel 50-16141] 121/ 32" x 13/ 4" x 7/ 16" #6 12 4.43 EA 50-16151] 25/ 32" x 21/ 8" x 15/ 32" #6 12 4.71 EA 50-16231] 33/ 4" x 33/ 4" x 17/ 8" #6 12 45.30 EA Chrome Plated Brass 50-16101] 19/ 16" x 11/ 2" x 15/ 32" #4 12 12.50 EA 50-16131] 2" x 23/ 32" x 19/ 32" #6 12 18.61 EA 50-16201 33/ 4" x 33/ 4" x 17/ 8" #6 12 58.37 EA Great for routing cables. VENTILATOR 16141 16101 Stamped 304 stainless steel midget clam shell vents provide a splash-proof opening through transoms, cabin sides, etc. Great for routing cables or wires through a hole or for covering thruhull openings to shield water spray. Ideal for small lockers, they provide attractive cover for ventilation holes while also preventing odors. Three pre-drilled holes for a smooth screw on installation. #6 RH fasteners not included. MIDGET CLAM SHELL VENTS Item# Size A B C Qty List 354-3313601 Small 15/ 8" 13/ 4" 1/ 2" Card 7.29 EA 354-3313701 Large 21/ 4" 21/ 8" 5/ 8" Card 6.59 EA Heavy-duty stamped 304 stainless steel midget vents feature a reinforced rim making them durable enough to stand on. Great for routing cables or wires through a hole or for covering thru-hull openings to shield water spray. Ideal for small lockers, they provide attractive cover for ventilation holes while also preventing odors. Three pre-drilled holes for a smooth screw on installation. #6 RH fasteners not included. STAINLESS STEEL HEAVY-DUTY MIDGET VENT Item# A B C List 354-3313751 33/ 4" 31/ 2" 15/ 16" 18.59 EA Item# Color Size Qty Case List 232-CSS1DP Black 7/ 16" x 7/ 8" 2 12 19.49 PK 232-CS1DP Black 9/ 16" x 17/ 8" 2 12 19.59 PK Black Molded, UV and weather resistant. CLAM SHELL VENT Save the expense of removing and replacing connectors. They allow waterproof co-axial installation without removing connectors and help avoid poor connections from removing factory connectors. Come with stainless screws. CABLE CLAMP Item# Description List 661-1001 .680" connector opening 35.19 EA 661-1002 .834" connector opening 35.19 EA 661-1003 1.396" connector opening 38.99 EA • Pre-drilled and slit rubber seals for easier installation. • A polished stainless steel dress cap conceals mounting hardware, matches other deck hardware and offers protection from UV • Stainless steel fasteners included • For use above the waterline only CABLE CLAMP W/ STAINLESS STEEL DRESS CAP Item# Description List 661-1001100 .680" connector opening 46.89 EA 661-1002100 .834" connector opening 54.59 EA 661-1003100 1.40" connector opening 62.39 EA • One-piece design for easy side mount installations • Low profile, contoured edge reduces the risk of tangling lines • Includes fasteners • For use above the waterline only • Max cable Diameter: 0.28" • Max Connector Diameter: 1" • UV-Stabilized thermoplastic ring & Buna-N rubber gasket Provides a waterproof side entry for antenna cables without requiring removal of the factory installed connector. 1007100 Features a SS dress cap to conceal mounting hardware. SIDE ENTRY CABLE CLAMP Item# Description List 661-1007 w/White Cap 12.79 EA 661-1007100 w/SS Dress Cap 22.49 EA Item# Size Base Case List 50-10011] Outlet: 1/ 4" 11/ 4" dia. 12 8.60 EA 50-10021] Outlet: 5/ 16" 11/ 4" dia. 12 8.88 EA 50-10031] Outlet: 3/ 8" 11/ 2" dia. 12 9.02 EA Watertight chrome plated brass. Threaded cap and rubber gasket. For complete waterproofing of cable. Use #6 screws. CABLE OUTLET

RkJQdWJsaXNoZXIy MTI2MTky