GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW D SEA VALUE Y OVERSIZED GCOURIER SURCHARGE SECTION 963 STEERING Features helm rotor supported by 3 roller bearings, ball bearing piston race, simplified integrated metal construction, field replaceable shaft seal, -5 ORB port threads, internal pressure relief valve, front of dash fill, lock valve for positive rudder lock, patented bleed tubes and internal air pocket to eliminate oil expansion overflow. Compact and stylish. Fits 3'' dash hole for round look with retro fit of 41/ 2'' dash hole for standard square look. Equipped with adjustable O-ring fittings to simplify the installation process and allow for simple reorientation of the fittings after installation. Helms with part numbers ending in "3" are equipped with adjustable O-ring fittings allows for simple reorientation of the fittings after installation. Item# Type Mount List 1-HH52714 Dometic 1.7 Front 1215.99 EA HH52714 SEASTAR HELM Item# Description List 1-HA5419 20° Dash Mounting Wedge Kit 254.19 EA For standard helms. Allows a Dometic helm to be mounted 20° from perpendicular (not for BayStar). DASH MOUNTING WEDGE KIT Item# List 1-HA5418 130.59 EA Square backplate kit for the 5271 and 5272 Dometic helms. Used to retrofit new Dometic standard helm into hole cutouts BACK MOUNT KIT Item# Description List 1-HS5147 Kit for Older model BayStar helms HH4016 & HH4015 w/plastic housing 47.49 EA 1-HP6032 Kit for Dometic helms 1990- newer, Baystar HH4313, HH43133-3 HH4315, HH4315-3 36.59 EA HELM SERVICE KITS Outboard steering offers models of steering cylinders to suit most applications. Side mount cylinders are unbalanced and offer 4.8 or 5.7 turns lock-to-lock. It is suitable for shallow splashwells and use on engines fitted with power steering. For single engines to 300 hp and multiple outboard engine installations with total power to 600 hp in counter rotating applications. SEASTAR OUTBOARD CYLINDER HC53703 Item# Type Description List 1-HC53703 Side Mount Side Mount Cylinder - 125-8 1272.79 EA Item# Type Description Mount List 1-HC53453 Front Mt. Pivot 1511.99 EA 1-HC53483 Front Mt. OMC 1857.19 EA 1-HC53583 Front Mt. Yamaha 4-stroke Pivot 1694.99 EA Repl. Parts Description List 1-HO5090 Spacer Kit 89.99 EA 1-HP6033 Mounting hardware for O/B pivot plate cylinder HC5345 154.29 EA Updated cylinders fit the same applications as the prior models. Improvements over previous models include: Updated styling, a more robust barrel, new sealing systems and materials with excellent resistance to compression set, and new adjustable stainless steel O-ring fittings (ORB). Front Mount cylinders are balanced and the most commonly used. Recommendations: Single Engines: Single Cylinder: 350 HP-Max, 65 MPH-Max HC53xx Cylinder (See note 1) Single Cylinder: 350 HP-Max, HC63xx Pro or HC6845S (See note 2) Dual Engine Non-Counter Rotating: Single cyl: 450 hp max, 55 MPH max. HC53xx Cylinder, HO60xx Tiebar Dual cyl: 600 hp max, 55 MPH max. HC53xx Cylinders, HO60xx Tiebar Dual Engine Counter Rotating: Single cyl: 600hp max, 55 MPH max. HC53xx Cylinder, HO60xx Tiebar Dual cyl: 600 hp max, 55 MPH max. HC53xx Cylinders, HO60xx Tiebar Triple Engine One with Counter Rotating: Dual cyl: 900 hp max, 55 MPH max. HC53xx Cylinder, HO60xx Tiebars Triple cyl: 900 hp max, 55 MPH max. HC53xx Cylinders, HO60xx Tiebars Note 1. Dometic has specific steering equipment for boats that are driven aggressively, used in severe conditions or with more than 300 HP per engine. Before ordering, determine the best application for the boat based on hull design, speed, and usage. For higher speed single engine applications, Seastar recommends the use of Seastar PRO cylinders. SEASTAR FRONT MOUNT OUTBOARD CYLINDER Front Mount HC_cylinder HC_cylinder Suited for all those critical high speed, single powered outboard boats, like Bass, Flats, combo Race/Ski and other performance orientated boats capable of speeds in excess of 65mph. The SeaStar Pro Front Mount Outboard Cylinders have keyed support brackets to prevent racking of the cylinder which gives it a more solid feel and more robust bushings. For optimal performance we recommend to combine the use of SeaStar Pro Helms and reinforced Kevlar hoses only(1500 psi). Adjustable stainless steel O-ring fittings (ORB). SEASTAR® PRO FRONT MOUNT CYLINDERS HC63453 Item# Description Mount List 1-HC63453 SeaStar Pro Pivot 1862.89 EA
RkJQdWJsaXNoZXIy MTI2MTky