GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW ] SEA VALUE v OVERSIZED dCOURIER SURCHARGE SECTION 887 PLUMBING Combo includes bilge pump and Rule-A-Matic float switch. • Completely Submersible • Ignition Protected • Mercury-Free Switch • Stainless Steel Shaft • High Abrasion, Tin Coated Silicone Blocked Wire • Includes Black Flow Preventer PUMP AND SWITCH COMBO Item# Volts GPH List 29-24DA35A 12 360 101.69 EA 29-25DA35A 12 500 135.79 EA Ignition protected, submersible, double insulated motor runs cooler and can run dry. Double strainer non-clogging protection. Compact, efficient and maintenance free. Moisture tight PTFE seals. Silent running, vibrationless w/anti-airlock feature. Heat resistant housing with a 5/ 16" stainless shaft and a nylon/fiberglass impeller. Item# Volts GPH Hose Amps List 29-25SA] 12 500 3/ 4" 1.9 164.59 EA 29-20SA 12 800 3/ 4" 2.8 203.39 EA 29-27SA] 12 1100 1" & 11/ 8" 3.3 249.99 EA ROUND AUTOMATIC BILGE PUMPS The eco-friendly Rule Mate pumps feature a solid state water sensing technology to eliminate a separate float switch. The sensor's unique "field effect" technology is ecofriendly because straight motor oil in the bilge will not turn on the pump. Includes a straight hose fitting, a snap-on strainer for easy cleaning and an anti-fouling impeller. 3-Year limited warranty. Item# Volts GPH Hose Amps List 29-RM500B] 12 500 3/ 4" 1.8 134.59 EA 29-RM800B] 12 800 3/ 4" 3 184.79 EA 29-RM1100B] 12 1100 11/ 8" 3.8 236.89 EA 29-RM1500A 12 1500 11/ 8" 4.8 425.19 EA 29-RM2000A 12 2000 11/ 8" 12 547.49 EA RULE-MATE™ AUTOMATIC BILGE PUMP RM500B/ RM800B/ RM1100B RM1500A/RM2000A Back View Item# Volts GPM Ports List 29-DB412 12 4 3/ 4" 506.49 EA • Control panel switch included • Drains the bilge almost dry • Filter-free design • Self-priming to 9.5' (3 m) • Able to run dry without damage • Back flow prevention • 3/ 4" (19 mm) hose barbs • Rotating pump head and ports • Compact and simple design • 3/ 4" 90° plastic thru-hull fitting included DRY BILGE PUMP Designed for 110 volt AC application and installation possibilities. Comes with 8' cord and elbow adapter. Includes garden hose adapter and 90° elbow adapter for 1" NPT pipe. AUTOMATIC 110AC VOLT PUMPS WITH CORD Item# Volts GPH Hose List 29-A53S 110 AC 1800 11/ 8" 453.79 EA Straight 90° For use on newer Rule bilge pumps with interchangeable ports. BARBED BILGE PUMP PORT FITTING Item# Hose Fits List 29-1200R 3/ 4" 360 / 500 GPH 17.69 EA 29-1201R 3/ 4" 360 / 500 GPH 18.69 EA 29-1202R 1" 360 / 500 GPH 21.49 EA 29-1203R 3/ 4" 800 / 1100 GPH 22.19 EA 29-1204R 3/ 4" 800 / 1100 GPH 21.39 EA 29-1205R 1" 800 / 1100 GPH 16.59 EA 29-1206R 1" 800 / 1100 GPH 24.79 EA 29-1207R 11/ 8" 800 / 1100 GPH 18.99 EA 29-1208R 11/ 8" 800 / 1100 GPH 19.59 EA Allows for side mounting to vertical stringer, bulkhead or transom. Use when bottom-strainer mounting is inconvenient or impossible. Simply remove strainer, place in bracket and reassemble. Pump nozzle may point in any of three directions. BRACKET MOUNT Item# Fits List 29-66 360, 500 & 1100 GPH 25.79 EA CHECK VALVE Item# Fits List 29-1221R 800 / 1100 12.79 EA 29-1222R 800 / 1100 12.19 EA 29-1223R 800 / 1100 12.19 EA Original replacement strainer base for your Rule bilge pumps. Item# Fits List 29-275 Round Rule Pumps 360 to 1100 GPH models 12.99 EA 29-278 Round Rule Pumps 1500-2000 GPH Models 20.49 EA 29-1231R Rule Submersible Bilge Pump 360 / 500 32.39 EA 29-1232R Rule Submersible Bilge Pump 800 / 1100 32.69 EA REPLACEMENT STRAINER BASES 1232R 1231R 275 278 69 67 Molded from heavy-duty, high impact plastic. Rust and corrosion proof. HOSE ADAPTERS Item# Description List 29-69 11/ 8" hose to 3/ 4" or 5/ 8" hose (not for use with Rule-Mate pumps) 12.59 EA 29-67 11/ 2" hose to 11/ 8" hose 17.69 EA
RkJQdWJsaXNoZXIy MTI2MTky