GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEMS ARE STOCKED IN OUR WAREHOUSES BASED ON REGIONAL DEMAND. IF AN ITEM IS NOT IN STOCK AT A LOCAL WAREHOUSE, ADDITIONAL CHARGES MAY APPLY. 888 SECTION PLUMBING Item# Size List 29-61 3/ 4" 19.39 EA High impact molded plastic. Will not rust, corrode or discolor. 90° THRU-HULL FITTINGS Designed for rigid pipe installations of sump and utility pumps. Adapters snap onto discharge port without the need for a hose clamp. High impact plastic will not rust, corrode or discolor. 90° ELBOW ADAPTER Item# Ports List 29-58 11/ 4" NPT 21.39 EA Item# Volts Description GPH Ports List 452-69300 12 Submersible pump 600 3/ 4" 38.69 EA 452-69301 12 Submersible pump 800 or 1100 3/ 4" or 1 1/ 8" 53.19 EA Cartridge-style pump head. Pump body accepts both ¾" and 11/ 8" screw-on outlets to allow ease of installation. Use the 3/ 4" outlet for 800 GPH or the 11/ 8" outlet for 1100 GPH flow rates. Universal strainer base is connection-compatible with Attwood Tsunami, Rule and Johnson/Mayfair cartridge pumps. Screw mounting holes match Rule and Attwood Tsunami pump bases. Ignition protection and low power draw. Runs dry without damage. Meets ABYC, Coast Guard and ISO marine standards. BILGE PUMP Item# Volts Description GPH Ports List 452-69310 12 Automatic 600 3/ 4" 80.89 EA 452-69311 12 Automatic 800 or 1100 3/ 4" & 11/ 8" 95.29 EA Self-priming, centrifugal pump is ideal for all watercraft and designed for easy new or retrofit installations. • Cartridge style pump head • Universal strainer base is connection-compatible: fits Attwood Tsunami, Rule, Johnson/Mayfair cartridge pumps • Meets ABYC, Coast Guard and ISO marine standards • Igntion protection • Low power draw • Runs dry without damage AUTOMATIC BILGE PUMP Self-priming, 12V centrifugal pumps. Ideal for all watercraft. Designed for easy installation and retrofitting. • Cartridge style pump head • Body accepts 3/ 4" screw-on outlets • Universal strainer base fits Attwood Tsunami, Rule & Johnson/Mayfair cartridge pumps • Runs dry without damage • Screw mounting holes match Rule and Attwood Tsunami • Meets ABYC, Coast Guard and ISO marine standards • Ignition protection • 1-Year Warranty THRU-HULL BILGE PUMP Item# GPH Ports List 452-69320 600 3/ 4" 57.59 EA Cartridge-style pump head. Pump body accepts both ¾" and 11/ 8" screw-on outlets to allow ease of installation. Use the 3/ 4" outlet for 800 GPH or the 11/ 8" outlet for 1100 GPH flow rates. Ignition protection and low power draw. Runs dry without damage. Meets ABYC, Coast Guard and ISO marine standards. THRU-HULL BILGE PUMP Item# Volts GPH Ports List 452-69321 12 800 or 1100 3/ 4" or 11/ 8" 68.89 EA Item# Volts GPH Hose Amps List 698-SS5012 12 500 3/ 4" 2.6 79.02 EA Low profile design for narrow bilges. Can be installed with horizontal or vertical outlet position. Flow rate of 500 US gals per hour and very low power consumption. Easy to clean with "twist lock" assembly/disassembly. Removable strainer is designed to leave a minimum water level 3/ 8" in bilge. Recommended optional extra - A non-return valve fitted in line stops water flowing back into bilge (LV1219 Non return valve) Can be used with Whale's BE9002 float switch or BE9003 Electric Filed Sensor Switch. LOW PROFILE ELECTRIC BILGE PUMP Item# Volts GPH Hose Amps List 698-SS5212] 12 650 w/o Non-return valve, barbed connection 3/ 4" 3.4 145.17 EA 698-SS1212] 12 1100 w/Non-return valve 1" - 11/ 8" 4.6 205.09 EA The narrow design is ideal for tight spaces and the multiposition pump head and body makes either a vertical or horizontal installation quick and easy. Pump automatically senses the water level and switches on and off as needed with an environmentally friendly, solidstate, mercury free design that is unaffected by wave action. 3" max. overall height, 21/ 8" max. overall width. SUPERSUB SMART LOW PROFILE AUTOMATIC BILGE PUMP SS5212 SS1212 Item# Volts GPH Hose List 698-BE1450 12 1300 11/ 8" 76.11 EA 698-BE2002 12 2000 11/ 8" 222.43 EA Compact powerful submersible electric bilge pumps. Large filter base ensures maximum surface area exposed to bilge water. • High performance • Compact design • Low amp draw • Efficient design • Simple installation- Multiple wire locations • Easy access to motor cartridge & filter • Robust ABS fuel-resistant housing ORCA BILGE PUMP 500-1300 GPH 2000-3000 GPH Item# Volts GPH Hose List 698-BE1482 12 1300 1" - 11/ 8" 245.38 EA Requires no additional field sensor or float switch, they are integrated within the pump for effective automatic bilge pumping. The submersible pump has a large footprint ensuring lowest water level detection and maximum surface area exposure to bilge water. ORCA AUTO 1300 BILGE PUMP • Remote mounted pump • Soft start for long pump life • Small footprint strainer • On/off delay prevents cycling • Time delay for optimum drainage • Override wire for manual activation • Non-choke valves – no filter to block • Self primes and can run dry Easy access remote mount bilge waste pump and strainer system featuring non-clog electric valve technology. BILGE IC REMOTE MOUNT AUTOMATIC BILGE PUMP Item# Volts GPH List 698-SI8284 12 300 677.69 EA
RkJQdWJsaXNoZXIy MTI2MTky